|
Name |
Write Test Machine |
|
Manufacturers |
SKYLINE |
|
Number of samples |
8 / time |
|
Test Diameter |
≤26mm |
|
The rotary speed of the core |
0-2 to min (digital input set) |
|
Pen reciprocating movement |
Travel 100mm |
|
Writing Speed |
0-10m/min (digital input settings) |
|
Paper Speed |
0-1000mm/min (digital input setting) |
|
Writing angle |
60-90° adjustable |
|
Writing Length |
0-6000m |
|
Reminding function |
After testing the instrument automatically stop (the pen automatically lift) |
|
Paper-draw back function |
Instrument with paper collection |
|
Weight |
60kg |
|
Dimension |
72cm*57cm*48cm |
Pen Dedicated Scribing Tester machine is a 60g special weight set in the lower end of the pen, so that the pen and writing paper straight surface into 50 ° ~ 70 ° angle of inclination, with 20mm / s ~ 25mm / s scribing speed of straight lines with bare hands, check whether the line is in line with the requirements of QB/T 1655-2006 Table 2.
Pencil-Core Concentration Tester This machine is used to determine the concentration of pencil core a test instrument.
Pencil Lead Core Slip Tester This machine is to add 400g weight to the pen clip, set the counting meter to zero, turn on the motor, lead core rotating friction on the copper plate to 100 turns, turn on the recorder, start drawing lines to record, wait for the recorder to rotate for a week and then turn the motor off.
Pencil Core Strength Tester/Strength Testing Machine is used to test the force on the tip of lead core: sharpen the pencil to 20° and install it on the 45 degree gripper, the force value on the tip when there is breakage.
Crayon Softening Point Tester is to determine the temperature of crayons when they soften in order to identify stickiness and heat resistance.
Cap Of Pen Air Flow/Cycle Tester is used to stationery manufacturers pen cap ventilation qualified rate inspection, quality supervision departments of stationery manufacturers to produce pen cap inspection, third-party inspection agencies, etc.
Computerized Pencil Lead Core Slip Tester This machine is to add 400g weight to the pen clip, set the counting meter to zero, turn on the motor, lead core rotating friction on the copper plate to 100 turns, turn on the recorder, start drawing lines to record, wait for the recorder to rotate for a week and then turn the motor off.
Decompression Instrument This machine is suitable for decompression of samples to observe whether there is ink leakage from the refill.
This machine is used to test the light resistance of the trace of water-based pen. Put the sample on the irradiation frame and irradiate it with ultraviolet lamp for a certain time to check the resistance of the trace to light.
GET A QUOTE